Mortar for filling joints in masonry, ceramic tiles, and cast basalt tiles and for filling pipe joints and corroded, washed out joints in wastewater engineering structures
classic
REPROFILING, JOINT-FILLING, MASONRY, AND COATING MORTAR
SC-AwaTec® classic is a cement-based, polymer-modified one-component coating mortar for sewer construction and sewer rehabilitation.
AREAS OF APPLICATION
- Wastewater and purification plants
- Coating of concrete and stonework manholes as well as sewage drains
- Potable water protection zones
- Filling of joints and repair of damaged areas
- Usable up to a pH of 3.5 in municipal sewage
PROPERTIES
- Fibre-reinforced
- Resistant to frost and de-icing salt
- Highly sulphate-resistant
- Short-term resistance to water impact
- Very high bonding strength
- Very high adhesive strength
- Impermeable to water, thus sealing against pressing groundwater
- XA3 according to DIN 206-1 and Class R3 according to EN 1504
- Long-term sewage temperature up to 90°C
inject
INJECTION MORTAR FOR FILLING CRACKS, IMMOVABLE JOINTS, CAVITIES, AND FOR GROUND STABILISATION.
SC-AwaTec® inject is a cement-based, polymer-modified one-component injection mortar for sewer construction and sewer rehabilitation.
AREAS OF APPLICATION
- Wastewater and purification plants
- Sealing of tanks, sections, and manholes
- Potable water protection zones
- Pressure grouting
- Can be used in a pH range of 5–9
PROPERTIES
- High bonding strength
- Volumetrically stable
- Very good pumpability
- Impermeable to water, thus sealing against pressing groundwater
GeoSpray®
REPROFILING, JOINT-FILLING, MASONRY, AND COATING MORTAR
SC-AwaTec® GeoSpray® is a cement-based, one-component geopolymer mortar for sewer construction and sewer rehabilitation.
AREAS OF APPLICATION
- Coating of concrete and stonework manholes as well as sewage drains
- Potable water protection zones
- Filling of joints and repair of damaged areas
PROPERTIES
- Fibre-reinforced
- Resistant to frost and de-icing salt
- Highly sulphate-resistant
- Resistant to strong chemical attacks in exposure class XWW3 according to DIN 19573
- Undergoing testing for its resistance to chemical attacks in separator systems according to DIN EN 858-1
- Short-term resistance to water impact
- Very high bonding strength
- Very high adhesive strength
- Impermeable to water, thus sealing against pressing groundwater
- Long-term sewage temperature up to 90°C
GeoSpray® HCE
REPROFILING, JOINT-FILLING, MASONRY, AND COATING MORTAR
SC-AwaTec® GeoSpray® HCE is a cement-based, one-component geopolymer mortar for sewer construction and sewer rehabilitation.
AREAS OF APPLICATION
- Coating of concrete and stonework manholes as well as sewage drains
- Potable water protection zones
- Filling of joints and repair of damaged areas
PROPERTIES
- Resistant to strong chemical attacks in exposure class XWW4 according to DIN 19573
- Resistant to biogenic sulphuric acid corrosion (BSC)
- Fibre-reinforced
- Resistant to frost and de-icing salt
- Highly sulphate-resistant
- Short-term resistance to water impact
- Very high bonding strength
- Very high adhesive strength
- Impermeable to water, thus sealing against pressing groundwater
- Long-term sewage temperature up to 90°C
CONTACT
We look forward to hearing from you!
PARTNERS
